Sicosa

A high-performance, chemical-resistant epoxy grout offering superior strength, stain resistance, and long-lasting durability for demanding tile applications.

Contact Info

Get A Quote
+91 90990 85222
SICOPRIME

High-Performance Tile & Surface Primer

SICOPRIME is a polymer-based primer specially designed to improve adhesion between substrates and tile adhesives. It penetrates surfaces to strengthen weak areas and ensures a durable bond for ceramic and vitrified tiles on interior and exterior walls and floors.

SICOPRIME Tile Adhesive Primer

SICOPRIME TILE ADHESIVE

Polymer Modified Thin-Set Tile Adhesive (TYPE 02 – GRAY)

Sico Prime is a polymer-modified, thin-set tile adhesive designed for fixing ceramic, semi-vitrified, and vitrified tiles. It is suitable for both vertical and horizontal applications over cementitious substrates and is intended for indoor use in residential and commercial environments.

Areas of Application (Type 2 – C2T)

  • ✔️ Suitable for fixing ceramic and vitrified tiles, including glazed and terracotta tiles.
  • ✔️ Recommended for vitrified tiles up to 5 ft × 2.5 ft in size.
  • ✔️ Suitable for application on internal walls and floors.
  • ✔️ Designed for residential and commercial spaces.
  • ✔️ Applicable on cement-based substrates and concrete surfaces.

Application Instructions

  • ✔️ Open the pack and take the required quantity of material into a clean bucket.
  • ✔️ Add 28–30% clean water as per the material quantity for best results.
  • ✔️ Mix using a mechanical stirrer to achieve uniform consistency and better coverage.
  • ✔️ Apply evenly using a trowel on hard floor screed or hacked wall surfaces.

Product Information

  • Pack Size: 20 Kg
  • Type: Type 02 – C2T
  • Shelf Life: Shelf life is up to 15 months from the date of production when stored in undamaged original packaging under dry conditions.
  • Coverage: Approximately 25–30 sq. ft. per bag depending on tile size, trowel notch, and substrate condition. Actual coverage may vary based on surface evenness and application technique.
  • Application Areas: Suitable for fixing ceramic, semi-vitrified, and vitrified tiles on indoor walls and floors.
  • Tile Types: Ceramic, Semi-Vitrified, Vitrified & Terracotta Tiles
Key performance parameters

Technical Properties

Density Approx. 1.75 kg/litre
Pot Life Minimum 120 minutes
Open Time Minimum 30 minutes
Adjustability Minimum 23 minutes
Setting Time Approx. 1 day
Full Strength Approx. 14 days
Tensile Strength > 1.20 N/mm²
Shear Strength > 1.25 N/mm²